Deleted
Posts: 0
Currently Offline
|
Post by Deleted on Feb 7, 2016 18:37:14 GMT -8
I bet some are laughing, but really.. is it a bad idea to use aluminum tape for the accent lightning stripe line? Wife and I have been trying to find something that will look decent but its not turning out great. We arent interested in doing the spraying through a gun. If the tape is a bad idea thats understandable but as far as painting that strip what is recommended? The rustoleum metallic sprays are much too runny. Either way I hope I gave someone a laugh!
|
|
nccamper
Administrator ![*](//storage.proboards.com/forum/images/stars/star_red.png) ![*](//storage.proboards.com/forum/images/stars/star_red.png) ![*](//storage.proboards.com/forum/images/stars/star_red.png) ![*](//storage.proboards.com/forum/images/stars/star_red.png)
Posts: 7,745
Likes: 2,872
1962 Forester- 1956 Shasta
Currently Offline
|
Post by nccamper on Feb 7, 2016 18:40:01 GMT -8
I like the polished metal stripe. That's what I did on the last one.
|
|
mobiltec
5K Member
![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png)
I make mistakes so you don't have to...
Posts: 9,825
Likes: 3,752
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 7, 2016 18:53:55 GMT -8
If you're not out to win any shows it will work. But over time it will crack and become dull and then you are left with a larger problem. How to get that dang tape off... Polishing the bare metal and then painting both sides of it is a little tough to do from what I've seen. And you must use special masking tape so that paint doesn't soak under the edges. Some people outline the stripe at the paint lines with very skinny colored tape. Not sure what it's called. Detailing Tape? Pin Striping Tape? That's gonna come off eventually too I think. I have the stripe painted silver with a shade of metal flake stuff thrown in. It really looks good and it isn't going to come off or have to be polished any more than the rest of the trailer. The toughest paint job I have thrown at my painter was the 58 Deville. He did an excellent job... The one inch outlines around everything was done with that metal flaked silver. It changes colors depending on the sun angle... ![http://www.cannedhamtrailers.com/monthly/deville.jpg](http://www.cannedhamtrailers.com/monthly/deville.jpg)
|
|
nccamper
Administrator ![*](//storage.proboards.com/forum/images/stars/star_red.png) ![*](//storage.proboards.com/forum/images/stars/star_red.png) ![*](//storage.proboards.com/forum/images/stars/star_red.png) ![*](//storage.proboards.com/forum/images/stars/star_red.png)
Posts: 7,745
Likes: 2,872
1962 Forester- 1956 Shasta
Currently Offline
|
Post by nccamper on Feb 7, 2016 19:15:03 GMT -8
|
|
mobiltec
5K Member
![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png)
I make mistakes so you don't have to...
Posts: 9,825
Likes: 3,752
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 7, 2016 19:46:51 GMT -8
Oh dang I wasn't aware of this thread... I'm going to read it top to bottom. Thanks Nc.. Guess it's easier than it looked...
|
|
Deleted
Posts: 0
Currently Offline
|
Post by Deleted on Feb 7, 2016 20:17:06 GMT -8
Nccamper yoy have quite the detailed thread of how you did yours I am sure that had helped many! We were thinking about having the stripe be the metal itself. I love that idea. Also incidentally the green you used is not far from our color! Mobiltec the Deville looks awesome that is true talent there. Well I am so happy with how ours is coming. Well I will perhaps ask some of my automotive painter friends at the dealerships what they would recommend. Thanks guys.
|
|
Deleted
Posts: 0
Currently Offline
|
Post by Deleted on Feb 7, 2016 20:38:06 GMT -8
Well not too bad for someone of my skill. For once it's not in a photo but in my driveway! On a side note planning on getting a dummy vent cover for that larger area. I think that would be much better than an ugly metal patch.
|
|
kirkadie
1K Member
Posts: 1,156
Likes: 556
'69 Serro Scotty Hilander
Currently Offline
|
Post by kirkadie on Feb 7, 2016 20:40:36 GMT -8
Rich, I wonder if your "too runny" problem is because you might be trying to spray too much paint too fast. Really light 'ghost' coats will solve the runs. It might take 4-6 light coats, but you can do a narrow area like the stripe successfully with a rattle can if each coat is just a light dusting. Like others have already said, if the silver tape fails, the adhesive left on the skin will be a bear to clean off.
|
|
SusieQ
Global Moderator ![*](//storage.proboards.com/forum/images/stars/star_silver.png) ![*](//storage.proboards.com/forum/images/stars/star_silver.png) ![*](//storage.proboards.com/forum/images/stars/star_silver.png) ![*](//storage.proboards.com/forum/images/stars/star_silver.png)
Posts: 4,781
Likes: 1,197
'62 Shasta Compact
Currently Offline
|
Post by SusieQ on Feb 7, 2016 21:54:07 GMT -8
Is it a bad idea? Yes.
|
|
zipper
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 58
Likes: 11
1966 zipper , 1961 trotwood
Currently Offline
|
Post by zipper on Feb 7, 2016 22:39:15 GMT -8
I too had wondered about silver tape , it all makes sense
|
|
carvelloafer
Junior Member
![*](//storage.proboards.com/forum/images/stars/star.png)
Posts: 92
Likes: 33
1959 Lil Loafer
Currently Offline
|
Post by carvelloafer on Feb 8, 2016 5:26:15 GMT -8
I don't know what kind of aluminum tape you might be thinking of but the stuff I am familiar with is for sealing duct work. It is aluminum (not duct tape) and is very difficult to go on straight. It sticks good but I think the weather will loosen it off. I made some cooler cozies using it to tape up the foil insulation and over time and weather exposure it came loose.
If you pick something that is purpose designed for striping then it might work, sort of like wide pin stripping on a car???
Personally, I like Larry's idea of painting it in spite of the effort.
|
|
Deleted
Posts: 0
Currently Offline
|
Post by Deleted on Feb 8, 2016 7:19:33 GMT -8
Ok, thanks guys for the feedback on the tape, I agree that either get it painted nicely with someone familiar with metallic paint or perhaps an automitive graphics line as mentioned. Any other thoughts appreciated.
|
|
Deleted
Posts: 0
Currently Offline
|
Post by Deleted on Feb 8, 2016 19:43:16 GMT -8
Ok, we finally found an easy compromise. We didn't even know there was a Rustoleum metallic paint in the can, and we decided on the hammered silver. $11.50 for a quart at HD which isnt even gonna all be used. The hammered aspect will hide any brush strokes nicely and create a really neat look. Brushed it on a couple spots already and looks great. It is oil based but it's designed to be durable and isn't going to be on the whole camper just the strip obviously. But no over spray, no need to have someone do it for me, and no worry about the application being uneven.
|
|
mobiltec
5K Member
![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png) ![*](//storage.proboards.com/forum/images/stars/star_lavender.png)
I make mistakes so you don't have to...
Posts: 9,825
Likes: 3,752
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 8, 2016 19:59:11 GMT -8
Ok, we finally found an easy compromise. We didn't even know there was a Rustoleum metallic paint in the can, and we decided on the hammered silver. $11.50 for a quart at HD which isnt even gonna all be used. The hammered aspect will hide any brush strokes nicely and create a really neat look. Brushed it on a couple spots already and looks great. It is oil based but it's designed to be durable and isn't going to be on the whole camper just the strip obviously. But no over spray, no need to have someone do it for me, and no worry about the application being uneven. I've used the Hammered Copper paint a lot for restoring light fixtures. The stuff looks great and no brush strokes if you spray it on. So I bet the silver would look just as good.
|
|
Deleted
Posts: 0
Currently Offline
|
Post by Deleted on Feb 8, 2016 20:20:36 GMT -8
Ok, we finally found an easy compromise. We didn't even know there was a Rustoleum metallic paint in the can, and we decided on the hammered silver. $11.50 for a quart at HD which isnt even gonna all be used. The hammered aspect will hide any brush strokes nicely and create a really neat look. Brushed it on a couple spots already and looks great. It is oil based but it's designed to be durable and isn't going to be on the whole camper just the strip obviously. But no over spray, no need to have someone do it for me, and no worry about the application being uneven. I've used the Hammered Copper paint a lot for restoring light fixtures. The stuff looks great and no brush strokes if you spray it on. So I bet the silver would look just as good. Wow very cool Mobiltec I bet the fixtures look real sharp.
|
|