Ten
3K Member
Posts: 3,432
Likes: 1,467
70 Shasta 16SC + 1964 Airflyte
Currently Offline
|
Post by Ten on Oct 20, 2014 14:49:51 GMT -8
I know I probably have not done my due diligence yet in trying to find this. It is the inside trim seal of the door, used on the later-60's and 70's Shastas. These would be the doors with the "waffle" pattern in the aluminum panels inside and out. I have the door apart and reframed, but hate to put the aluminum pieces back together to finish it without replacing this seal trim. Tough to get a good photo of its shape. This is the interior of the door...this stuff runs on three sides of the door, attached to the aluminum outer frame. Any ideas on where to find it for sure would be appreciated. I checked VTS but did not find this. Might have overlooked it.
|
|
|
Post by bigbill on Oct 20, 2014 15:46:14 GMT -8
My 68 uses a double break rail on all three side made from aluminum just like the door covers. not cast.
|
|
Schatzi
Active Member
Posts: 113
Likes: 46
1959 Shasta Airflyte
Currently Offline
|
Post by Schatzi on Oct 20, 2014 16:35:52 GMT -8
Check out Tim Heintz at www.heintzdesigns.com/Sale.phpHe is fabricating a lot of stuff for vintage trailers even does the skins. I think I saw one of the parts you need on his website. Good Luck!
|
|