kaffi311
Active Member
Posts: 283 
Likes: 98
1963 Shasta 16 SC
Currently Offline
|
Post by kaffi311 on Aug 16, 2018 17:45:32 GMT -8
Is it ok to run the wires for 2 separate circuits through the same hole in my wall framing? Thanks  IMG_4337 by kathy, on Flickr |
|
|
|
Post by vikx on Aug 16, 2018 19:41:29 GMT -8
Yes, as long as they are not "tight" together. Wiring should never be cramped because it can build up heat. Enough heat = fire. If you can move them by hand just a little, they should be fine.
|
|
aslmx
1K Member
Posts: 1,056 
Likes: 367
Currently Offline
|
Post by aslmx on Aug 17, 2018 18:37:45 GMT -8
Be sure to use Mobiltecs trick and mark your wiring with some orange paint so you don’t run a screw or staple in them when you put the skin on.
|
|
akfishguide
New Member
Posts: 4
Likes: 3
Currently Offline
|
Post by akfishguide on Feb 20, 2019 17:55:52 GMT -8
|
|
nccamper
Administrator 
Posts: 7,822
Likes: 2,931
1962 Forester- 1956 Shasta
Currently Offline
|
Post by nccamper on Feb 20, 2019 19:52:32 GMT -8
The problem with these plates is they rub against softer aluminum when the camper is moving.
|
|
|
|
Post by vikx on Feb 20, 2019 21:19:07 GMT -8
Thick tape over the metal works to protect the aluminum. These plates have saved my bacon a time or two..
|
|
gary350
Full Member
We should have gone camping today it is going to snow 6" tonight.
Posts: 573
Likes: 170
1964 FAN
Currently Offline
|
Post by gary350 on Jun 4, 2019 18:01:28 GMT -8
You must have big studs to have pvc pipe in the wall?
|
|
