mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Mar 16, 2023 6:46:52 GMT -8
It’s definitely covered! We moved it out into the rain specifically to test for leaks. Just because you don't see the leaks inside, does not mean that it's not leaking. All trailers leak after 7 years. Even Airtstreams. And be VERY careful who you hire to do the restore. I have a student in the shop right now who paid a bonehead who claimed to be a professional to "Re-Seal" her 71 LoFlyte. She paid him $4000 and he went out and bought a case of calking and slathered calking all over everything on the trailer. Of course it continued to leak and now she he here having me help her to stop the leaks temporarily until she can restore the trailer properly.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 26, 2023 15:34:03 GMT -8
Thanks Scott... The price of Shellac has tripled... It's now up to $37 a quart.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 26, 2023 5:44:45 GMT -8
Could you tell us exactly where you got your flakes from and is this called AMBER for color??? Shellac has tripled in price lately. I don't know how they can call that 9 percent inflation.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 8, 2023 7:57:46 GMT -8
The MOTHER of all vintage trailer projects.... This must be done to exact specifications. You need to do a lot of research and you're probably going to be doing some fabrication along the way. This must be done right. We're all here to help. Thanks for bringing this project to us.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Feb 8, 2023 7:53:51 GMT -8
Copper would become too soft at higher temps and the seals would be affected in a bad way.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Jan 14, 2023 8:22:37 GMT -8
You don't take trailers apart from the inside.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Jan 12, 2023 11:25:22 GMT -8
The grinding noise is the magnet dragging on the drum plate which is normal. That's how those systems work. You can clean all of that up and it will make less noise.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Jan 2, 2023 14:47:07 GMT -8
Ya i saw this a while back. Someone on You Tube interviewed the owner and took a tour of both models. The bathroom one is just too dang crowded and this thing in my opinion is way over priced just like everything else on the market. It does have a lot of bells and whistles but it's still just a box on wheels.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Jan 2, 2023 13:05:42 GMT -8
Find an outside source for DMV work. I use a place in CA even now that I live in NV. I just got the impossible done with a boat and trailer with no titles and I just ran it through a DMV service in CA that I've been dealing with for years. Took about 3 months and I had titles in hand from CA. So then I just went to my local DMV and changed them to NV...
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Dec 29, 2022 6:45:04 GMT -8
Just gotta say that this build was one of the finest accomplishments on this forum since I've been here. And I think my Mainline might be right up there with it. Both well done and both very rare.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Dec 26, 2022 8:52:41 GMT -8
Not long ago I did a couple classes teaching how to completely refurbish a Princess stove. During that class I put out this short tip video.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Dec 26, 2022 6:34:21 GMT -8
It's tough learning everything the hard way. That's why this forum is here and why I make videos. Sometimes CA can be reasonable with things like registration and sometimes they can be a real pain. But even if you DO buy without a title you need to get one before you invest any more money. A quick call to Triple A or a visit to the DMV to find out if it's stolen or not can save you a lot of time, grief and money. So don't be impatient. Do your due diligence. You'll be glad you did later.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Dec 24, 2022 10:20:47 GMT -8
Thanks for chiming in, Larry. I've watched a bunch of your videos and learned a lot already about how to approach this project. I agree that it needs a total rebuild. What do you see in the pictures I posted that show PO work and modifications? Well on first look at the photos I thought a lot of the paneling went in later. But on second look, I think it might be original. So perhaps there is no PO work done on the trailer. Photos can be deceiving. Especially when looked at on the internet. I can't wait to see what's under the metal skin.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Dec 21, 2022 14:48:59 GMT -8
Trot is a good trailer. This one has seen way better days and a lot of PO work. Most of it wrong LOL. It's going to need a complete rebuild. Frame Off. So you are going to want to document every single piece and fastener you remove while taking it apart. That way you will know how to put it back together. By the way I teach a class on this online.... But we can help and I have over a thousand videos on my You Tube channel. Plus my free website. www.cannedhamtrailers.com Welcome to the board and get ready for the ride of your life.
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,749
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Dec 6, 2022 8:46:13 GMT -8
|
|