Post by ag on Jun 27, 2015 9:07:49 GMT -8
I just bought an inexpensive 1981 Holidaire with the intention of renovating it so I can live in it. The structure of the trailer seems good and most of the systems work, but there is some mold. I plan to seal up the leaks and replace all the moldy paneling and damp insulation/2x4's. Are there any steps I should take during this process to ensure that I am doing this in the most effective way? I want the spores GONE. It's gotta be safe for sleeping and living!
to VTT. I am assuming that a 1981 Holidaire would have contemporary Big Box store type paneling in it, not birch or ash smooth surface wood paneling. So if you are not planning to replace all the interior paneling, what are your plans for matching what remains with what you replace? Are you going to paint the interior when repairs are completed? Reason I'm asking is because if you paint, you could consider Kilz or Kilz II as a base coat and even to coat the framing, since it will entomb any spores not removed or guard against mold and mildew once in place. The original Kilz is oil based and Kilz II is latex I believe. If you can spray a good commercial mold and mildew remover on the mold and it comes off fairly easily chances are that you probably don't have a health issue. I think stubbern black(ish) mold is sometimes the bad kind. You should be able to do an internet search to find photos to help you identify bad mold. It is important that you understand how your camper was made (put together) in order to successfully remove the damaged parts and pieces and install the replacements and maintain the original structural integrity of your Holidaire. There is a generic diagram of how many of the vintage trailers are assembled available on this Forum.