mtpalms
Active Member
Posts: 317
Likes: 125
Currently Offline
|
Post by mtpalms on Sept 13, 2016 16:14:33 GMT -8
The stove is nearly ready to put back together. BF 'thinks' there was gasket material between to burner assemblies, but it could have just been rat gunk. Does anyone know if there ought to be gaskets, or some sort of sealant between the parts, and if so, where can we get it? Here are the parts dis-assembled: Upside down, but how they go together: How the looked in the stove before they were removed: A repair manual would be great, if possible. It is a Trav'lr, but I think the components on these basic stoves were all the same.
|
|
|
Post by vikx on Sept 13, 2016 23:12:32 GMT -8
There are no gaskets that I know of. Burners need to breathe, so air gaps are good from the valve to the burner.
|
|
mtpalms
Active Member
Posts: 317
Likes: 125
Currently Offline
|
Post by mtpalms on Sept 14, 2016 3:55:41 GMT -8
|
|