kiansi
New Member
Posts: 5
Likes: 3
Currently Offline
|
Post by kiansi on Oct 17, 2023 20:35:47 GMT -8
I know what gimp looks like and how it's used on trailers from watching Mobiltec videos, but what I don't know is, what is it? Is there another word for it? I googled it and found gimp cording, which is not the same as gimp used on trailers. The closest thing I have found is piping bias that people use in sewing, which looks like the gimp used on trailers except it's all cotton.
Also, what's its purpose? I know it's put in the seams between where the paneling meets at 90 degree angles. Is it just a trim? Does it reinforce the seam?
Where can I get it?
Thanks in advance!
|
|
newin62
Active Member
Posts: 183
Likes: 151
1962 Shasta Airflyte
Currently Offline
|
Post by newin62 on Oct 18, 2023 3:03:36 GMT -8
Gimp is commonly called cabinet welt and it is available at Vintage trailer Supply and Vintage Trailer Gaskets. It is just trim and doesn't reinforce the seam.
|
|
|
Post by Teachndad on Oct 18, 2023 12:27:20 GMT -8
Hi,
Your asking good questions. The purpose for the gimp is to stop squeaking when you walk in the trailer.
When you walk through the trailer your weight will shift pressure at the intersections of the walls and floor or ceiling and top of the walls as examples. The gimp silences the friction that would otherwise occur as wood rubbed against wood.
It also offers a more finished look. It comes in handy to cover gaps that might occur.
Cheers,
Rod
|
|
|
Post by vikx on Oct 18, 2023 12:46:32 GMT -8
You can even make your own gimp. Buy vinyl, roll over small cord and stitch.
|
|
|
Post by Teachndad on Oct 18, 2023 13:06:00 GMT -8
You can do a search on a thread where member Newin62 who previously posted to this thread describes how he made gimp. It might be in his restoration thread on his Shasta. Not sure
Rod
|
|
kiansi
New Member
Posts: 5
Likes: 3
Currently Offline
|
Post by kiansi on Oct 19, 2023 16:12:41 GMT -8
Thank you all! I appreciate your help!
|
|
|
Post by Teachndad on Oct 21, 2023 6:16:39 GMT -8
Love your avatar. Cool looking trailer! I really like the large front window. Another of our well respected members, NCcamper restored a Forester similar to yours, you might search posts on his Forester for repairs and images. Here is one of his early posts. vintagetrailertalk.freeforums.net/thread/1491/1962-forester-first-camperIf I can find the link to the Forester album, I will send you a link. Cheers, Rod
|
|
hotrodjim
Active Member
Posts: 101
Likes: 14
Currently Offline
|
Post by hotrodjim on Oct 22, 2023 5:29:41 GMT -8
My father used to do upholstery work for a living.
Making your own gimp is fairly easy if you have any experience with sewing.
It’s basically the same principle as upholstery with a cord inside wrapped with a vinyl or fabric material.
I don’t think you need to have a powerful sewing machine to make this gimp, But it can be time consuming.
I ended up going through vintage camper supplies for my camper project and got the brown.
Very happy I did and the product is very well made. Not sure if it’s vinyl or rubber.
|
|
nccamper
Administrator
Posts: 7,797
Likes: 2,911
1962 Forester- 1956 Shasta
Currently Offline
|
Post by nccamper on Oct 22, 2023 16:33:53 GMT -8
I wouldn’t say respect, I would say notorious …but I appreciate the thought. I love my Forester. They were built at first by a boat company in the off-season. Everything about them was overbuilt. They’re heavier than comparable campers but built to last. flic.kr/p/WaovdnThere is a yearly Forester rally (that just passed) you can find on Facebook. Lots of interesting photos.
|
|