|
Post by 67trailblazer on Mar 14, 2022 7:49:57 GMT -8
What have some of you don to match existing paneling when you just have one area damaged and the rest of the trailer is almost mint?
I'm pretty handy but this one is giving me a hard time. No wood paneling at the big box stores anymore except pressed paper/pressed wood.
Do you get a blank wood panel, put the groves in it, white wash the groves and stain the bare wood with as close a match as possible?
Or do you just say "no way this is going to match and just do something completely different like paint it white", leave it natural, or
Thankfully mine is on the rear where a window air conditioner was installed and leaked, rotted a foot section out of the back from the floor to above the seat/bed area.
This is my first post, thanks
my email is jtalley@gmail if that is ok to post, thanks
|
|
mobiltec
5K Member
I make mistakes so you don't have to...
Posts: 9,822
Likes: 3,748
1954 Jewel In Progress...
Currently Offline
|
Post by mobiltec on Mar 14, 2022 11:48:26 GMT -8
Show that photo you sent me Jerry.
|
|