pdalber
Junior Member
Posts: 75
Likes: 37
Currently Offline
|
Post by pdalber on Aug 22, 2021 13:23:54 GMT -8
|
|
pdalber
Junior Member
Posts: 75
Likes: 37
Currently Offline
|
Post by pdalber on Jan 30, 2022 17:12:03 GMT -8
It's been QUITE a while since my last update, but we decided to brave the wicked winter conditions here in S Florida and get in a little trailer work. The walls, dinette seats, and a bench seat with storage are already complete. The goal today was to finish up the bathroom wall and build a floor-to-ceiling cabinet that will fit between the bathroom and kitchen. the cabinet will consist of two drawers in the lower half, and a rack for hanging clothes in the upper portion. The bathroom wall was mostly done. We just added some trim and did some sanding: The cabinet is 1x2" framing with 1/4" birch for the skin. The front edge of the bathroom wall and the front edge of the cabinet are white maple. I rounded the corners with a router and added a V-groove along the seam between the birch and the maple.
I created the groove using a flush trim bit that I learned about on a YouTube channel I follow. I really like the detail it created.
My next step will be to shellac everything that I have built. I'm going to try applying it with a spray gun - wish me luck!
|
|
aslmx
1K Member
Posts: 1,044
Likes: 360
Currently Offline
|
Post by aslmx on Feb 1, 2022 17:33:54 GMT -8
I like that groove. I’ll have to try it on something.
|
|
grabber
New Member
Posts: 5
Currently Offline
|
Post by grabber on Mar 18, 2023 17:49:21 GMT -8
|
|