jdaan
New Member
Posts: 2
Currently Offline
|
Post by jdaan on Apr 18, 2019 16:01:37 GMT -8
Hello. I've just purchased a 1966 Concord Traveler. I'm planning to do a complete strip-down and rebuild. Frame is in decent shape, although nearly everything else is either gone or needs to go. What's left is going to serve as a template for the rebuild. Exterior is mostly intact, but the interior has been completely gutted by one of the previous owners. While I'm not planning to return it to like-original condition, I do want to start with an idea of what it used to look like. I've found very little info on this model so far, but was hoping some members here could give me an idea of the original layout. I only have the one pic below for now, but it gives a few clues. As far as I can tell from looking at the interior and window/vent placement, the kitchen and toilet were all on the driver's side. There's a hole for the furnace on the passenger side. I can't really picture how it was laid out. Total shell length is 15 ft. Does anyone have any info or pictures that might help? Thanks!! -Justin
|
|
|
Post by vikx on Apr 18, 2019 20:00:10 GMT -8
I'm sorry it was gutted by a PO. So hard to repair that way. Be sure to support the walls when you pull the skins, gutted trailers can be wobbly.
|
|