Billy
New Member
Posts: 23
Likes: 4
1964 Shasta Airflyte
Currently Offline
|
Post by Billy on Jul 24, 2014 14:31:06 GMT -8
Hi. I got 2 propane tanks for my Shasta today and I figured I'd hook em up and see what happens... Well first I tried thr stove.. No issues. I'm happy. Next I tried the gas lamp.. Well I didn't light it but I can hear the gas when I turn the knob.. I pulled the globe off and I'm not sure if it's missing anything or if it's ok to light as is.. I'm posting some pictures of what I have. Can anyone tell me what I'm missing if anything and instructions on where - how to light this thing... Thanks! Billy
|
|
txoil
Active Member
Posts: 459
Likes: 149
1960 Shasta Deluxe 19
Currently Offline
|
Post by txoil on Jul 24, 2014 16:20:25 GMT -8
You will need a mantle to go on the ceramic neck at the bottom. Academy or any hunting/outdoors/camping stores will have Coleman lantern mantles. You tie one around the ceramic neck, light the mantle and let it burn until it is all turned into ash. AT THAT POINT you can hold a live flame close to the mantle and turn gas on, the mantle will begin glowing and you are good to go.
|
|
|
Post by bigbill on Jul 24, 2014 16:53:57 GMT -8
HOld the match close but don't let the flame touch the mantle. If mantel even has a small hole it needs to be replaced.
|
|
SusieQ
Global Moderator
Posts: 4,781
Likes: 1,197
'62 Shasta Compact
Currently Offline
|
Post by SusieQ on Jul 24, 2014 18:09:56 GMT -8
You can also order a mantle with a hard ceramic ring that will fit on it. They are more expensive. But I suggest that you check your fittings BEFORE lighting anything (I know, too late). Use soapy water and spray it on the fittings with the propane connected and turned on at the bottle, but do not light anything or turn anything on. If you have bubbles that "grow" at your fitting connections, then you have a leak. And of course, their is also the smell test. Also, if you have the propane connected and you hear the gas without anything turned on, you have a leak. One more note, once you have the mantle and globe on, you hold your lighter/match under it LIT before you turn the gas on. If it builds up inside the mantle and then you stick a flame to it, the globe will explode. And like Bill said, don't touch the mantle.
|
|
Billy
New Member
Posts: 23
Likes: 4
1964 Shasta Airflyte
Currently Offline
|
Post by Billy on Jul 24, 2014 18:31:29 GMT -8
Ok so the mantle is the little netting type sack thingy you see on a lantern.. Correct? And secondly,, the globe that was on this May be the one that belongs on the kitchen light.... It has no hole in the bottom.. Which by what you are describing you need an open bottom globe to light the mantle.. Correct?
|
|
SusieQ
Global Moderator
Posts: 4,781
Likes: 1,197
'62 Shasta Compact
Currently Offline
|
Post by SusieQ on Jul 24, 2014 18:47:33 GMT -8
Yes, the globe is open at the bottom. It should look like this:
|
|
|
Post by bigbill on Jul 24, 2014 18:57:41 GMT -8
Listen to SusieQ she is giving you the straight scoop. These gas light globes have to be heat resistant glass you can,t use just any globe with a hole in the bottom
|
|
coloradoan
Active Member
Posts: 114
Likes: 26
1959 Shasta Airflyte 16
Currently Offline
|
Post by coloradoan on Jul 27, 2014 19:08:55 GMT -8
I got a new hard mantle for mine, but I doubt I'll ever light the propane lamp. They make me nervous. In fact, I had my plumber install a shut-off valve behind the stove on the propane line going to the lamp. I will keep that shut-off closed unless and until I DO decide to light the lamp.
|
|